HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 244

FCDOMAIN Messages Chapter 2 System Messages and Recovery Procedures Send document comments to [email protected] Error Message FCDOMAIN-7-FABRICCONFCOMPLETEDRCF: Disruptive reconfiguration completed Explanation A disruptive reconfiguration (RCF phase) of the VSAN has completed. This can happen when two or more fabrics merged disruptively, or when the user manually triggered a disruptive reconfiguration of the VSAN. Recommended Action No action is required. Error Message FCDOMAIN-7-FC2_RETRY: Retransmission of FC2 frame on interface [chars] (Cmd Code: [hex]) Explanation Fcdomain is retrying an FC2 frame on interface [chars] due to loss/no response. The Command Code of the frame is [hex]. Recommended Action No action is required. Error Message FCDOMAIN-7-FCID_IN_USE_PURGING_FOR_FICON_MGR: FICON needs to purge the persistent FCID table, but at least one FCID is still in use, preventing this purge from completely remove all entries belonging to the VSAN. Explanation There may be a problem in the sequence that shuts down all interfaces before fcdomain receives a request from FICON Manager to purge the persistent FCID table. Recommended Action No action is required. Error Message FCDOMAIN-7-FSM_FAILED: FSM transition failed on interface [chars] (current state [chars]) Explanation Fcdomain state machine generated an invalid event on interface [chars], for which no proper action was defined (current state [chars].). Recommended Action No action is required. Error Message FCDOMAIN-7-FSM_FORBIDDEN_TRANSITION: fcdomain state machine has hit a forbidden transition Explanation Fcdomain state machine has tried to execute a forbidden transition. Recommended Action No action is required. Error Message FCDOMAIN-7-INTERFACERDY: Interface [chars] ready Explanation The interface [chars] is ready. Recommended Action No action is required. 2-206 Cisco NX-OS System Messages Reference OL-15994-03