HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 713

Chapter 2 System Messages and Recovery Procedures SYSMGR Messages Send document comments to [email protected] Error Message SYSMGR-2-CFGWRITE_ABORTED: Configuration copy aborted. Explanation A configuration copy has failed. Recommended Action Verify the other syslog messages printed correct the problem, and try again. Error Message SYSMGR-2-CFGWRITE_ABORTED_DIR: Unable to open the configuration directory. Aborting configuration copy. Explanation The destination location for the startup-config could not be found. Recommended Action If the problem persists, please use the vshboot command 'init system' to initialize the configuration partition. Error Message SYSMGR-2-CFGWRITE_ABORTED_INIT: Unable to initialize the configuration directory (error-id [hex]). Aborting configuration copy. Explanation An attempt to copy the running-config to startup-config has failed because the old data could not be removed. Recommended Action If the problem persists, please use the vshboot command 'init system' to initialize the configuration partition. Error Message SYSMGR-2-CFGWRITE_ABORTED_LABEL: Unable to label the new configuration (error-id [hex]). Aborting configuration copy. Explanation An attempt to copy the running-config to startup-config has failed because the new startup-config could not be stamped. Recommended Action If the problem persists, please use the vshboot command 'init system' to initialize the configuration partition. Error Message SYSMGR-2-CFGWRITE_ABORTED_LOCK: Unable to lock the configuration (error-id [hex]). Aborting configuration copy. Explanation An attempt to copy the running-config to startup-config has failed because the system could not lock the required configuration items. Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message SYSMGR-2-CFGWRITE_ABORTED_LOG: Unable to open a log file for the new configuration: [chars] (error-id [hex]). Aborting configuration copy. Explanation An attempt to copy the running-config to startup-config has failed because a log file could not be created. Recommended Action If the problem persists, please use the vshboot command 'init system' to initialize the configuration partition. OL-15994-03 Cisco NX-OS System Messages Reference 2-675