HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 712
SYSMGR-2, Cisco NX-OS System Messages Reference, OL-15994-03,
View all HP Cisco Nexus 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 712 highlights
SYSMGR Messages Chapter 2 System Messages and Recovery Procedures Send document comments to [email protected] SYSMGR-2 Error Message SYSMGR-2-BOOTSCOPE_HANDSHAKE: Service [chars] is in the boot scope, but tried a regular handshake. Discarding request. Explanation A service is trying to take actions that belong to a different class of services. Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message SYSMGR-2-CFGERASE_ABORTED: Write erase aborted. Explanation Write erase has failed. Recommended Action Verify the other syslog messages printed correct the problem, and try again. Error Message SYSMGR-2-CFGSNAPSHOT_ABORTED: Configuration snapshot aborted. Explanation An attempt to save a snapshot of the startup-config has failed. Recommended Action Verify the other syslog messages printed correct the problem, and try again. Error Message SYSMGR-2-CFGSNAPSHOT_ABORTED_DIR: Unable to open the configuration directory. Aborting configuration snapshot. Explanation The destination location for the snapshot-config could not be found. Recommended Action If the problem persists, please use the vshboot command 'init system' to initialize the configuration partition. Error Message SYSMGR-2-CFGSNAPSHOT_ABORTED_INIT: Unable to initialize the configuration directory (error-id [hex]). Aborting configuration snapshot. Explanation An attempt to copy the startup-config to snapshot-config has failed because the old data could not be removed. Recommended Action If the problem persists, please use the vshboot command 'init system' to initialize the configuration partition. Error Message SYSMGR-2-CFGSYNC_FAILURE: Syncing of the configuration to the standby failed. Explanation Syncing of the configuration to the standby failed. Recommended Action Verify the other syslog messages printed correct the problem, and try again. 2-674 Cisco NX-OS System Messages Reference OL-15994-03