HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 361
ISIS-4-LAN_DUP_SYSID Format: L%d LAN IIH - Duplicate system ID %s
View all HP Cisco Nexus 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 361 highlights
Chapter 2 System Messages and Recovery Procedures ISIS Messages Send document comments to [email protected] Error Message ISIS-4-ILLEGAL_PREFIX Format: Ignore internal L%d route %s/%d with external metric from %s Explanation IS-IS has detected an internal route advertised with external metric, which is an illegal combination, by a router within the network Parameters: Level, Address Prefix, Mask, LSP Id ... Recommended Action You must correct the remote system that is generating the incorrect information. Either reconfigure the remote system or update the system software to a version that does not originate incorrect information. Error Message ISIS-4-LAN_DUP_SYSID Format: L%d LAN IIH - Duplicate system ID %s detected over %s from %s Explanation IS-IS has detected another system on the indicated LAN that is reusing the local system ID Parameters: Level,The system ID, Interface Name, MAC ID ... Recommended Action Configure either the local or remote router with a different system ID using the command net. Error Message ISIS-4-LSP_DUP_SYSID Format: L%d LSP - Possible duplicate system ID %s detected Explanation IS-IS has detected another non-directly connected system that is reusing the local system ID. Parameters: Level,The system ID ... Recommended Action Configure either the local or remote router with a different system ID using the command net. Error Message ISIS-4-LSPFULL Format: L%d %s LSP space is full Explanation There is no storage space left for routing information in the router's LSP Parameters: Level, LSP Type ... Recommended Action Configure IS-IS so that less information will be distRIButed in the router's LSP, for example by reducing redistRIButed prefixes. Error Message ISIS-4-LSPFULL_FAILED_DROP Format: L%d %s LSP is full and couldn't remove lower priority TLVs to make room for type %d TLV Explanation There is no storage space left for routing information in the router\sLSP,andanattempttodroplowerpriorityinformationhasfailed.' Parameters: Level, LSP Type, TLV Type ... Recommended Action Configure IS-IS so that less information will be distRIButed in the router's LSP, for example by reducing redistRIButed prefixes. OL-15994-03 Cisco NX-OS System Messages Reference 2-323