HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 166

DOT1X Messages Chapter 2 System Messages and Recovery Procedures Send document comments to [email protected] Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_VERIFY_START: Job Id:%Ld NumSession:[dec] Explanation Event indicating the start of a Data Migration Job Verification. Recommended Action No action is required. Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_VERIFY_STOP: Job Id:%Ld NumSession:[dec] Explanation Event indicating the Suspension of Data Migration Job Verification by the user. Recommended Action No action is required. DOT1X Messages This section contains the DOT1X messages. DOT1X-2 DOT1X-3 Error Message DOT1X-2-DOT1X_INIT: Dot1x unable to start Explanation The system failed to create the Dot1x process. Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message DOT1X-3-ERR_SPANDST: It is configured as a SPAN Dest port. Explanation Dot1x and SPAN Dest ports are mutually exclusive features. Recommended Action Disable SPAN destination port configuration first before reconfiguring Dot1x on the port. Error Message DOT1X-3-INVALID_INPUT: Invalid on interface [chars]. Explanation The Dot1x interface parameter is out of the specified range or is invalid. Recommended Action Refer to the CLI help documentation to determine the valid 802.1x parameters. Error Message DOT1X-3-MEM_UNAVAIL: perform the 802.1X action. Explanation Insufficient system memory is available to perform the Dot1x Authentication. Recommended Action Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. 2-128 Cisco NX-OS System Messages Reference OL-15994-03