HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 462

NPV Messages Chapter 2 System Messages and Recovery Procedures Send document comments to [email protected] Error Message NPV-6-NPIV_DISABLED: [chars] Explanation NPIV feature has been disabled. Recommended Action No action is required. Error Message NPV-6-NPIV_ENABLED: [chars] Explanation NPIV feature has been enabled. Recommended Action No action is required. Error Message NPV-6-NPV_ENABLE_DISABLE_IN_PROGRESS: [chars] Explanation NPV feature enable/disable is in progress. This sylog is printed at the beginning of various significannot phases. Recommended Action No action is required. Error Message NPV-6-NPV_LOAD_BALANCE_TIMER_START: (Re)starting automatic load balancing timer for [dec] seconds Explanation Timer started for upon external interface up or server interface down. When the timer goes off some of the server interfaces may be reinitialized to evenly distRIBute the server interfaces among the eligible external interfaces. Recommended Action No action is required. NPV-7 Error Message NPV-6-SERVER_PROXY_LOGO_SENT: [chars] Explanation NPV process sent a LOGO frame to the core switch as the server interface went down. Recommended Action No action is required. Error Message NPV-7-CFS_REQ_RCVD: [chars] Explanation CFS request is received. The WWN of the switch originated this request and the rr-token of the request are provided in the syslog message. Recommended Action No action is required. 2-424 Cisco NX-OS System Messages Reference OL-15994-03