HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 741

Chapter 2 System Messages and Recovery Procedures SYSMGR Messages Send document comments to [email protected] Error Message SYSMGR-3-LC_SAVE_STATES_FAILURE: Save states request for the linecard failed(error-id [hex]). Explanation Save state request for the line card failed. Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message SYSMGR-3-LC_STOP_ASYNC_FAILURE: Stop async notification request failed(error-id [hex]). Explanation Stop asynchronizationnotification request for the line card failed. Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message SYSMGR-3-LC_UPG_ERROR: LC ERROR: [chars] Explanation Linecard upgrade error message. Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message SYSMGR-3-MISSING_OPTIONAL_CAPABILITY: Incomplete support for the current running-config on standby supervisor. Explanation Loose config incompatibilities exist between active and standby sup. Operational redundancy mode is still set to HA. Recommended Action No action is required. Error Message SYSMGR-3-MODULE_LOCK_FAILED: Failed to lock the local module to avoid reset (error-id [hex]). Explanation Locking the local module has failed. Reloading the local module can now result in switchover to fail. Recommended Action No action is required. Error Message SYSMGR-3-ND_UPGD_RECOVERY_SRVFAILED: Service [chars] in vdc [dec] failed in non-disruptive upgrade recovery (error-id [hex]). Explanation The nondisruptive upgrade failed because a service could not recover its state. Recommended Action No action is required. OL-15994-03 Cisco NX-OS System Messages Reference 2-703