HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 656

SPI-SLOT# Messages Chapter 2 System Messages and Recovery Procedures Send document comments to [email protected] Error Message SPAN-6-STATELESS_SWITCHOVER: Span is starting stateless after switchover. Explanation Active sessions are not preserved across switchover. Span is starting stateless and the configuration will be reapplied to get back the active configuration. Recommended Action No action is required. SPI-SLOT# Messages This section contains the SPI-SLOT# messages. SPI-SLOT#-2 Error Message SPI-SLOT#-2-SPI_INFO: [chars] Explanation SPI Informational message. Recommended Action No action is required. STP Messages This section contains the STP messages. STP-2 Error Message STP-2-BLOCK_BPDUGUARD: Received BPDU on port [chars] with BPDU Guard enabled. Disabling port. Explanation A BPDU was received in the interface specified in the error message that has the spanning tree BPDU Guard feature enabled. As a result, the interface was administratively shut down. Recommended Action Either remove the device sending BPDUs or disable the BPDU Guard feature. The BPDU Guard feature can be locally configured on the interface or globally configured on all ports that have portfast enabled. After the conflict has been resolved, re-enable the interface by entering the no shutdown command in interface configuration mode. 2-618 Cisco NX-OS System Messages Reference OL-15994-03