HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 549
The port failed FC-SP authentication with its peer.
View all HP Cisco Nexus 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 549 highlights
Chapter 2 System Messages and Recovery Procedures PORT Messages Send document comments to [email protected] Error Message PORT-5-IF_DOWN_FCOT_VENDOR_NOT_SUPPORTED: Interface [chars] is down (Error disabled - FCOT vendor not supported) Explanation FCOT inserted is not a supported one. Recommended Action Contact customer support for a list of authorized transceiver vendors. Error Message PORT-5-IF_DOWN_FCSP_AUTHENT_FAILURE: Interface [chars] is down (FC-SP authentication failure) Explanation The port failed FC-SP authentication with its peer. Recommended Action Check the FC-SP configuration. Error Message PORT-5-IF_DOWN_FICON_BEING_ENABLED: Interface [chars] is down(FICON being enabled) Explanation FICON is being enabled on the port. Recommended Action Wait. This might take a while. Error Message PORT-5-IF_DOWN_FICON_NOT_ENABLED: Interface [chars] is down(Error disabled - FICON not enabled) Explanation FICON not enabled on port. Recommended Action Please enable FICON on port. Error Message PORT-5-IF_DOWN_FICON_VSAN_DOWN: Interface [chars] is down(FICON vsan down) Explanation FICON is being enabled on the port VSAN of this port. Recommended Action This is an intermediary state, whereby the port VSAN of the port is being enabled to be a FICON VSAN. Error Message PORT-5-IF_DOWN_HW_FAILURE: Interface [chars] is down (Hardware Failure) Explanation The module's hardware has failed. Recommended Action Collect more information about failed module using the command 'show module internal all module'. Error Message PORT-5-IF_DOWN_INACTIVE: Interface [chars] is down (Inactive) Explanation The port VSAN has been suspended or deleted. Recommended Action Assign a new active port VSAN to the interface. OL-15994-03 Cisco NX-OS System Messages Reference 2-511