HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 471

Chapter 2 System Messages and Recovery Procedures OSPF Messages Send document comments to [email protected] Error Message OSPF-3-MAXIFS Format: Exceeded the limit on interfaces per area [i.e %d] Explanation Restricting the number of interfaces per area to avoid problems during lsa generation. Parameters: Interface Limit ... Recommended Action Reduce the number of interfaces per area. Error Message OSPF-3-MAXLSAS Format: Maximum number of LSAs in domain has been reached Explanation The OSPF domain contains more LSAs than this router can store. Recommended Action Redesign the network to redistRIBute less external routes into the OSPF domain. Error Message OSPF-3-MIB_FAIL Format: Failed to %s the MIB Explanation Error while loading or unloading the MIB. Parameters: action ... Recommended Action No action is required. Error Message OSPF-3-MTS_BIND Format: Error returned from mts_bind(), errno: %s Explanation OSPF called an MTS API which returned an error. Parameters: Error ... Recommended Action No action is required. Error Message OSPF-3-MTS_DROP Format: Error returned from mts_drop(), errno: %s Explanation OSPF called an MTS API which returned an error. Parameters: Error ... Recommended Action No action is required. Error Message OSPF-3-MTS_NOTIFY Format: Error returned from mts_send_notify(), errno: %s Explanation OSPF called an MTS API which returned an error. Parameters: Error ... Recommended Action No action is required. OL-15994-03 Cisco NX-OS System Messages Reference 2-433