HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 882
Virtual and Real devices are zoned together/with same device, virtual name: [chars], pwwn: [chars].
View all HP Cisco Nexus 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 882 highlights
ZONE Messages Chapter 2 System Messages and Recovery Procedures Send document comments to [email protected] Error Message ZONE-4-ZS_NON_INTEROPERABLE_ZONE_SET: Non interoperable active zoneset present on VSAN [dec] in interoperability mode Explanation Active zone set has noninteroperable members (FCID, FWWN, .) when interoperability mode is turned on the VSAN [dec]. Recommended Action Turn off interoperability mode OR make sure that active zone set has only interoperable members (PWWN). Error Message ZONE-4-ZS_QOS_LUN_WARNING: LUN member(s) and QoS attribute are present in zone [chars] in vsan [dec]. QoS will not be applicable for LUN members. Explanation QoS will not be applicable to LUN zone members in zone [chars] in VSAN [dec]. Recommended Action No action is required. Error Message ZONE-4-ZS_SDV_VIRT_REAL_CONFLICT_WARNING: Virtual and Real devices are zoned together or zoned with same device. virtual name: [chars] pwwn: [chars] Explanation Virtual and Real devices are zoned together or zoned with same device, virtual name: [chars] pwwn: [chars]. Recommended Action No action is required. Error Message ZONE-4-ZS_SDV_VIRT_REAL_CONFLICT_WARNING: Virtual and Real devices are zoned together/with same device virtual name: [chars] pwwn: [chars] Explanation Virtual and Real devices are zoned together/with same device, virtual name: [chars] pwwn: [chars]. Recommended Action No action is required. Error Message ZONE-4-ZS_TOO_MANY_ALIAS_IN_CURRENT_INTEROP_MODE: Too many aliases in current interoperability mode Explanation Too many aliases configured in current interoperability mode on the VSAN. Due to this, the next zone set activation, distRIBution or merge operation may fail. Recommended Action Set the interoperability mode to appropriate value OR make sure the number of aliases is less than the maximum allowed in the current interoperability mode. Error Message ZONE-4-ZS_UNSUPPORTED_MEMBER_IN_CURRENT_INTEROP_MODE: Unsupported member present in active or full zoneset in current interoperability mode Explanation Active or full zone set has members that are not supported in the current interoperability mode set on the VSAN. Recommended Action Set the interoperability mode to appropriate value OR make sure that active or full zone set has only supported members in the current interoperability mode. 2-844 Cisco NX-OS System Messages Reference OL-15994-03