HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 235

Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages Send document comments to [email protected] Error Message FCDOMAIN-3-PORT_SUSPENDED: Response (Cmd Code [hex]) for SWILS [hex] intended for [chars] is received on [chars] Explanation An FC2 response frame (Command Code [hex]) for SWILS [hex] that was intended for the interface [chars] has been received on [chars] instead. Recommended Action Check the configuration of both interfaces on the local switch and the interfaces on the other side of their corresponding links. In particular, check whether they should all belong to the same port channel. Error Message FCDOMAIN-3-SDWRAPBIND_FAILED: Bind to debug server failed Explanation Fcdomain feature has not been able to contact the debug service. Any problems occurring in the fcdomain feature will not be logged. Recommended Action No action is required. Error Message FCDOMAIN-3-SDWRAPHISTINIT_FAILED: Initialization of history message list failed. Explanation Fcdomain feature has not been able to contact the debug history service. Any problems occurring in the fcdomain feature will not be logged to this debug history. Recommended Action No action is required. Error Message FCDOMAIN-3-VSAN_MERGE_DETECTED: Merge detected with VSAN [dec] (Common Fabric Name [chars]) Explanation The local VSAN and VSAN [dec] have the same principal switch [chars], therefore are connected in the same logical fabric. Recommended Action No action is required. FCDOMAIN-4 Error Message FCDOMAIN-4-DM_ALLOWED_DM_LIST_MOD_ON_SUBORDINATE: Allowed domain list for vsan [dec] modified on subordinate switch with fcdomain distribution enabled Explanation When distRIBution is enabled, it is recommended to modify the allow domain list on the principal switch only. Recommended Action Abort the current session on the local switch and start a new one on the principal switch. OL-15994-03 Cisco NX-OS System Messages Reference 2-197