HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 197

Chapter 2 System Messages and Recovery Procedures ETH_PORT_CHANNEL Messages Send document comments to [email protected] ETH_PORT_CHANNEL-2 Error Message ETH_PORT_CHANNEL-2-RESET_MODULE: reset module [dec] for not responding or returning error Explanation A module is reset for not responding or returning error. Recommended Action No action is required. ETH_PORT_CHANNEL-3 Error Message ETH_PORT_CHANNEL-3-ALL_DROP_TIMEOUT: Some component(s) timed out on dropping notif:[chars] (for:[chars]); Please collect Explanation A component did not respond to a request in a stipulated time. Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message ETH_PORT_CHANNEL-3-COMPAT_CHECK_FAILURE: [chars] is not compatible Explanation Compatibility check failed when adding ports to port channel. Recommended Action Make sure the compatibility parameters are consistent while adding ports to port channel, or use force option. Error Message ETH_PORT_CHANNEL-3-GENERAL_ERROR: [chars] Explanation General error. Recommended Action No action is required. Error Message ETH_PORT_CHANNEL-3-LACP_ERROR: [chars] [chars] Explanation LACP error. Recommended Action No action is required. Error Message ETH_PORT_CHANNEL-3-MSG_SEND_FAILURE: failed to send [chars] to sap [dec]: [chars] Explanation The system has failed to send a message. Recommended Action No action is required. OL-15994-03 Cisco NX-OS System Messages Reference 2-159