HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 413

Chapter 2 System Messages and Recovery Procedures M6RIB Messages Send document comments to [email protected] M6RIB-2 M6RIB-3 Error Message M6RIB-2-API_INIT_SEM Format: Failed to init the client API semaphore: %s, create: %s Explanation M6RIB could not create the semaphore that protects access to the shared memory between M6RIB and its clients. Parameters: Operation, Error from the operation ... Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system. Error Message M6RIB-2-RES_MGR Format: Error returned from %s, errno: 0x%08x (%s) in %s() Explanation The resource manager returned an error to M6RIB, while M6RIB was performing an action relating to its shared memory Parameters: RM Function, Error Code, Error Description, Calling Function ... Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system. Error Message M6RIB-2-STARTUP_FAILURE Format: Startup failure: %s Explanation An unrecoverable software error has occurred during M6RIB startup. Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system. Error Message M6RIB-3-ACTIVE_TIMER_FAILED Format: active_timer_create() failed for m6rib_main() Explanation The M6RIB process has failed to create a timer. Recommended Action Dump core, then reload the stack. Error Message M6RIB-3-API_FAILED Format: %s failed Explanation The M6RIB process has failed in invoking an API. Parameters: Function ... Recommended Action No action is required. OL-15994-03 Cisco NX-OS System Messages Reference 2-375