Kyocera KM-C3232E C2525E/C3225E/C3232E/C4035E Operation Guide (Basic) - Page 141

Troubleshooting Error Messages Checkpoints Corrective Actions Reference Page Check paper size. Is the specified size paper loaded? Load paper of a size that can be - used. Reposition original. Is the orientation of the specified Change the orientation of the - paper different from that of the original. If you press the Start key original? without doing so, the original will be copied at the current size. Check paper size. Copy paper is Is the specified paper loaded? Or Load the specified paper. Adjust any - not the same size as original. are the settings incorrect? settings that are incorrect. (Paper size in cassette differs from actual size. Check paper size in cassette.) Reposition original or change Is the orientation of the specified Change the orientation of the - cassette. paper different from that of the original. (Reset original or select another original? paper cassette.) Is the copier installed beneath Do not install this machine beneath - fluorescent lights? fluorescent lights. Reset originals in processor. - Remove originals from the optional page 2-16 document processor, stack them uniformly and reset them. Reset all originals in processor. (Reset originals in processor.) - Remove originals from the optional page 2-16 document processor, and reset them in the original order. Reset all originals in Document Are there any originals left in the Reset all originals in the optional - Processor. optional document processor? document processor. (Reset originals in Document Processor.) Cannot copy this paper type. Can the specified copy functions be Select another type of paper. - used with the selected paper type? Cannot staple this paper type. Did you select a paper type that Select another type of paper. - cannot be stapled? Cannot punch this paper type. Did you select a paper type that Select another type of paper. - cannot be punched? Cannot staple this size. Is stapling available for the size of Change the paper size. - (Cannot staple this paper size.) the loaded paper? For further details, see the optional document finisher or 3000 sheet document finisher Operation Guide. Cannot punch this size. Is punching available for the size of Change the paper size. - (Cannot punch this paper size.) the loaded paper? For further details, refer to the optional 3000 sheet document finisher Operation Guide. Cannot staple. Is the maximum page quantity for Decrease the number of sheets to - ## :maximum capacity (Staple) stapling exceeded? For further be stapled to less than the maximum (Cannot staple. ## :Max. staples) details, see the optional document staple sheet count. finisher or 3000 sheet document finisher Operation Guide. The top tray is full of paper. During copying, is the maximum Remove some pages from the - Remove paper, and press "Start" capacity of the output tray output tray and press the Start key. key. exceeded? Printing continues. 6-5