Kyocera KM-C3232E C2525E/C3225E/C3232E/C4035E Operation Guide (Basic) - Page 38
Loading Paper, Before Loading Paper, Loading Paper into Cassette 1
View all Kyocera KM-C3232E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Preparation for Usage Loading Paper Load paper in the 2 cassettes, the MP tray, and/or the optional paper feeder or 3000 sheet paper feeder. Before Loading Paper When you open a new package of paper, fan through the sheets to separate them slightly prior to loading as described below. 1 Bend the stack of paper so that the middle of the paper lifts upwards. 2 Gripping both ends of the paper, push inward to cause the stack of paper to fluff up. 3 Introduce air into the stack of paper by alternately raising and lowering your left and right hands. 4 Finally, align the edges of the paper using a flat surface such as a countertop. If the paper is curled or folded, straighten it before loading. Overloading may cause paper jams. IMPORTANT: If you copy onto used paper (paper already used for copying), do not use paper that is stapled or clipped together. This may damage the machine or cause poor image quality. If output paper curls or does not line up properly, try flipping over the paper loaded into the cassette. Avoid exposing opened paper to high temperatures and high humidity as dampness may cause copying problems. Seal any remaining paper after loading the MP tray or a cassette in its original package. If the machine will not be used for a prolonged period, protect all paper from humidity by removing from the cassettes and sealing in the original package. Loading Paper into Cassette 1, 2 Cassettes 1 and 2 support standard, recycled, and colored paper. 500 sheets of standard paper less than 11 × 8 1/2" or A4 in size (80 g/m2), or 250 sheets of standard paper greater than 8 1/2 × 14" or B4 size (80 g/m2) may be loaded into Cassette 1. 500 sheets of standard paper (80 g/m2) may be loaded into Cassette 2. Supported paper sizes are 11 × 17", 8 1/2 × 14", 11 × 8 1/2", 8 1/2 × 11", 5 1/2 × 8 1/2", 8 1/2 × 13", 8 1/2 × 13 1/2", A3, B4, A4, A4R, B5, B5R, A5R, Folio, 8K, 16K and 16KR. Load paper into the optional paper feeder (Cassettes 3 and 4) in the same manner. IMPORTANT: When making color copies, use special color paper for best results. Do not use inkjet printer paper or paper with special surface coatings. (They may cause a failure, such as a paper jam.) After loading paper, be sure to specify the type and size of the paper loaded in the cassettes on the operation panel. For further details, refer to Specifying Paper Size on page 2-7 and Specifying the Paper Type on page 2-8. 2-2