Ricoh Aficio SP 4310N Software Guide - Page 157
Setting Up as a Print Server (NetWare 4.x, 5 / 5.1, 6 / 6.5
View all Ricoh Aficio SP 4310N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Using NetWare • Job Timeout: When the interface board is used as a NetWare remote printer, the printer cannot detect when a print job ends. Therefore, the printer terminates printing when a certain period of time has elapsed since it last received print data (i.e., when it has not received print data for a certain period of time). Specify here this period of time (3 to 255 seconds). The initial value is 15 (seconds). • Frame Type: Select the frame type from the drop-down menu. • Print Server Protocol: Select the protocol for NetWare from the drop-down menu. • NCP Delivery Protocol: Select the protocol for NCP delivery. 3. Confirm the settings, and then click [Device Name]. Configuration is now complete. Wait several before restarting Web Image Monitor. 4. Click [Logout]. • To check the configuration is correct, enter the following from the command prompt: F:> USERLIST • If the printer works as configured, the name of the print server appears as a connected user. • If you cannot identify the printer you want to configure, check the printer name against the 6 configuration page printed from the printer. For details about printing a configuration page, see p.99 "Test Printing". • If no printer names appear in the list, match the frame types of IPX/SPX for the computer and printer. Use the [Network] dialog box of Windows to change the frame type of the computer. • For details about Web Image Monitor, see p.135 "Using Web Image Monitor". Setting Up as a Print Server (NetWare 4.x, 5 / 5.1, 6 / 6.5) Follow the procedure below to connect the printer as a print server using NetWare 4.x, NetWare 5 / 5.1, or NetWare 6 / 6.5. • When using the printer as a print server in NetWare 4.x, NetWare 5 / 5.1, or NetWare 6 / 6.5, set it to the NDS mode. • When using NetWare 5 / 5.1 or NetWare 6 / 6.5, set the printer as a print server. 1. Log in to Web Image Monitor as an administrator. For details about logging in, see p.139 "Access in the Administrator Mode". 2. Click [Configuration] in the menu area, and then click [NetWare Print Settings]. 3. Confirm the settings, and then click [Device Name]. 4. Click [Logout]. 155