Yamaha A5000 Owner's Manual - Page 102

PLAY-EFFECT 4. EFFECT Selects and sets up the effects to be used with the current program. Press the [PLAY] button and then then [F4] function button to enter the effect mode. 3 display pages are provided: EfSetupA (Effect Setup A), EfSetupB (Effect Setup B), and EfEdit (Effect Edit). The A4000 does not have an EfSetupB page, only a single EfSetup page in place of the A5000's EfSetupA page. • See "Basic Operation" on page 78 for details on accessing the various display pages. • When "off", "StereoOut, "AsgnOutL&R" - "AsgnOut5&6" or "DIG&OPT" is selected as the sample output destination, no effect will be applied to the sound. In order to use the effects be sure to select "Ef1 - 6" ("Ef1 - 3" on the A4000). See page 129. • The sample's output destination can also be set via the EASY EDIT function (page 97). • When the program mode is set to "Multi" (page 89), the master program effect settings take priority (the master program is the program selected for the part assigned to the basic channel). If an effect function is accessed when any other part is selected "Not a Master Part" will appear on the display. If this happens select an appropriate part via the PLAY-PROGRAM-PgmSel page (page 89), and then use the effect functions. Effect Setup A [PLAY] button → [F4] button → Knob 1 to select "PLAY-EfSetupA" ("EfSetup" on the A4000). EFFECT SETUP A provides access to the Effect 1 - 3 effect types and three different effect connection types. Knob 2 [ Turn] Effect Type Select the effect type to be applied as Effect 1 - 3. For information about available selections, refer to the "Effect type list" in the appendix. (page 256) [ Press] LIST... (Effect Type List) Shows a list of the effect types. Knob 3 [ Turn] Effect Output Selects the output destination for Effect 1 - 3. [Range] StereoOut, AsgnOutL&R, AsgnOut1&2, AsgnOut3&4, AsgnOut5&6, DIG&OPT, Ef4, Ef5, Ef6 • StereoOut ... Output is sent to the rear-panel STEREO OUT jacks as well as the front-panel PHONES jack. • AsgnOutL&R ... The rear-panel assignable output jacks. • AsgnOut1&2, AsgnOut3&4, AsgnOut5&6 ... The corresponding assignable outputs on the optional AIEB1 I/O expansion board. • DIG&OPT ... The coaxial and optical digital outputs on the optional AIEB1 I/O expansion board. • Ef4, Ef5, Ef6 ... Output is routed to the specified effect (not available on the A4000). • When the output is connected to another effect will appear on the display and the effect output can not be selected. • The AsgnOut1&2, AsgnOut2&4, and AsgnOut5&6 output destinations cannot be selected unless the optional AIEB1 I/O expansion board is installed. [ Press] Effect1 BYPASS The Effect1 effect type display will appear as " (Bypass)" and Effect1 will be temporarily bypassed (no effect). Press a second time to to re-engage the effect. Turn action Press action Knob 1 Cursor/Page Tree View Knob 2 Effect Type LIST... Knob 3 Effect Output Effect1 BYPASS Knob 4 Effect1...3 Connect Effect2 BYPASS Knob 5 Effect4...6 Connect Effect3 BYPASS Knob 1 [ Turn] Cursor/Page Positions the cursor to select effect 1 - 3, and selects display pages. [ Press] Tree View Calls the Tree View display (page 83). 102 Chapter 4 PLAY Mode • A5000/A4000 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q