Yamaha A5000 Owner's Manual - Page 20

Audio Output Connections Audio Output Connections This section explains how to connect the A5000/A4000 audio outputs to external devices. • Be sure that power to the A5000/A4000 and to peripheral devices is OFF before making these connections. Connecting devices while power is ON may result in damage to amps or speakers. • Digital I/O connections are available only if the optional AIEB1 board is installed. Connecting the Analog Outputs The A5000/A4000 comes standard with the following stereo output jacks. • STEREO OUT Main analog output. • ASSIGNABLE OUT.......You can set the jacks to operate independently of the STEREO OUT jacks, so that they output selected samples or programs only. The feature is useful, for example, when you want to send the main signal to one audio device while sending a specific sample to a different device. But it is also possible to set these jacks so that they output the same signal as the STEREO OUT jacks. (page 195) If you have installed the optional I/O expansion board (AIEB1 board), your A5000/A4000 will include three additional ASSIGNABLE OUT pairs (ASSIGNABLE OUT jacks 1 to 6). For monaural output: A5000/A4000 Rear Panel ASSIGNABLE OUT R L STEREO OUT R L/MONO Amp, mixer, etc. INPUT For stereo output: A5000/A4000 Rear Panel ASSIGNABLE OUT R L STEREO OUT R L/MONO Amp, mixer, etc. INPUT L R 20 Chapter 1 Setting Up • A5000/A4000 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q