Yamaha A5000 Owner's Manual - Page 12

Panel and Connector Arrangement s Rear Panel q t w er A5000 q AC inlet Connects to the AC power cord supplied with the A5000/A4000. (Please do not use any other power cord with this unit.) w MIDI IN-A, IN-B, OUT, THRU-A, THRU-B (MIDI IN, OUT, THRU on the A4000) These connectors are for connection to external MIDI devices. The MIDI IN-A and MIDI IN-B connectors (MIDI IN only on the A4000) are for reception of MIDI messages, while the MIDI OUT connector is for MIDI transmission. MIDI THRU-A and THRU-B (MIDI THRU only on the A4000) retransmits the data received at the MIDI IN connector(s). e ASSIGNABLE OUT jacks Analog output jacks. These jacks operate independently of the STEREO OUT jacks. You can use these jacks to output the sound of one or more selected samples, or to output the signal supplied through the front panel's analog input connectors (page 97, 128). You may also set them so that they output the same signal as the STEREO OUT jacks (page 125). r STEREO OUT jacks These are the main analog output jacks. t SCSI connector This is a half-pitch 50-pin connector. You use it to connect up a SCSI hard drive, CD-ROM drive, or other SCSI device. 12 A5000/A4000 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q