Yamaha A5000 Owner's Manual - Page 81

3. Basic Operation Character Entry A display like the one shown below will appear when you choose to enter a sample name, program, name, etc. Turn action Press action Knob 1 Function menu EXEC Knob 2 Cursor SPACE & ENTER Knob 3 Character select ENTER Characters are entered via this display as follows: Knob 4 Character type CANCEL Knob 5 - OK Cursor Position The name being entered appears on the upper line. An underline cursor will appear below one of the characters in the name (in the example display above, the cursor is below "m"), and a new character can be entered at the cursor position. Rotate Knob 2 to move the cursor left or right to the desired character location. Character Selection After positioning the cursor at the desired character location, use Knob 3 to select a character in the lower display line. When a character is selected, the character at the cursor position in the name will change accordingly. The type of available characters can be changed by rotating Knob 4: you can select upper-case alphabet, lower-case alphabet, numbers, or symbols. Enter & Move To the Next Character When you've selected the desired character for the current cursor location as described above, press Knob 3 to actually enter that character and move the cursor to the next character location. Enter a Space & Move To the Next Character (Erase a Character) Position the cursor at the desired character location and press Knob 2 (SPACE&ENTER) to enter a space at that location and move to the next character. q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q A5000/A4000 • Chapter 3 The A5000/A4000 System & Features 81