Yamaha A5000 Owner's Manual - Page 172
VOLUME, Volume
View all Yamaha A5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
DISK-VOLUME 4. VOLUME VOLUME allows selection and management of volumes on the currently selected disk. • See "7. DISK COMMANDS" on page 177 for more information on disks, partitions, and volumes. Press the [DISK] button and then the [F4] button to go to the VOLUME display. 1 display page is provided: Volume. Volume [DISK] Button → [F4]Button → to select "DISK-Volume" The functions provided here make it possible to select volumes for saving or loading data, rename volumes, create new volumes, and load all data contained in the selected volume. • Only 1 volume can be created on a floppy disk. Floppy disk volumes are created automatically when the disk is formatted. Floppy disk volumes have a fixed name - "FD VOLUME" - which cannot be changed. Turn action Press action Knob 1 - Tree View Knob 2 Disk NEW VOL Knob 3 - DELETE Knob 4 Volume RENAME... Knob 5 - LOAD Knob 1 [ Press] Tree View Calls the Tree View display (page 83). Knob 2 [ Turn] Disk Selects the floppy disk, hard disk, or other storage media on which a volume is to be selected or created. When a disk is selected, all volumes it contains are listed on the right side of the display. When a hard disk, CD-ROM drive or similar storage device is selected, the SCSI ID number or IDE M/S (Master/Slave) status of the device is shown to the right of the disk name. [Range] All installed/connected disks. • If a connected SCSI or IDE device (hard disk, ZIP drive, etc.) cannot be selected, go to the disk select display (DISK-DISK-Disk) and check the mount/ unmount status and SCSI ID settings of the device (page 173). [ Press] NEW VOL Creates a new volume on the currently selected disk. Newly created volumes are automatically given the name "NewVolume (number)." Press Knob 4 to change the volume name. • New volumes cannot be created on floppy disks. Knob 3 [ Press] DELETE Deletes the selected volume and all files it contains from the disk. A confirmation display will appear when the knob is pressed. Press Knob 5 (>YES) to actually execute the delete operation. Knob 4 [ Turn] Volume Selects a volume. [Range] All volumes on the selected disk. [ Press] RENAME... Calls the display which allows entering a new name for the selected volume. see page 81 for details on character entry. • The volume on a floppy disk cannot be renamed. Knob 5 [ Press] LOAD All data in the currently selected volume - programs, samples, sample banks, and sequences - will be loaded. Previously exisiting programs, samples, sample banks, and sequences in the sampler's memory will be erased and replaced by the new data. When the knob is pressed a confirmation display will appear. Press Knob 5 (>YES) to actually execute the load operation. 172 Chapter 7 DISK Mode • A5000/A4000 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q