Yamaha A5000 Owner's Manual - Page 198

UTILITY-SYSTEM Knob 5 [ Turn] AUDITION Key Trigger Mode Selects whether the [AUDITION] button produces sound only while held down, or whether it continues to produce sound until pressed a second time. [Range] normal, toggle • normal ... The button produces sound only while you hold it down. Sound stops immediately when you release the key. • toggle ... Pressing the button once starts the playback. Pressing the key again stops the sound (if it is still playing) and disengages the key. Customise [UTILITY] Button → [F5] Button → Knob 1 to select "UTIL-Custom" Specifies how pitches will be displayed, which page will be displayed first when switching between modes and functions, and more. Cursor q Cursor q Knob 5 [ Turn] MIDI → Sample Layer Selection Determines whether or not multiple samples (sample banks) assigned to a note will be selected sequentially each time a note-on message is received when the MIDI To Sample function is used. [Range] atAllPages, onlyAtTree • atAllPages ... This function will be active at all times (when any display page is showing). Multiple samples (sample banks) assigned to a note will be selected one after the other each time the corresponding note-on meaasge is received. • onlyAtTree ... This function will be active only when the Tree View dislay is showing (i.e. the display called when Knob 1 is pressed). Multiple samples (sample banks) assigned to a note will be selected one afer the other each time the corresponding note-on meaasge is received. When any other display is showing one of the samples (sample banks) assigned to the received note will be selected, but multiple samples (sample banks) will not be selected in sequence. • The MIDI To Sample function can be used to select a sample or sample banks to be edited from an external MIDI device. Refer to page 83 for details. • These settings have no effect when the MIDI To Sample function is turned "off." Cursor w Knob 1 Turn action Cursor/Page Press action Tree View Knob 2 - - Knob 3 Note Display Type - Knob 4 - - Knob 5 MIDI>Sample Layer Selec- tion - Knob 1 [ Turn] Cursor/Page Positions the cursor and selects display pages. [ Press] Tree View Calls the Tree View display (page 83). Knob 3 [ Turn] Note Display Type This value selects the note display type. [Range] Name, Number • Name ... The A5000/A4000 displays note values by name. For example: C3, F4, F#-1 • Number ... The A5000/A4000 displays note values by MIDI note number. For example: 60, 77, 18. Cursor w Turn action Press action Knob 1 Cursor/Page Tree View Knob 2 - - Knob 3 Function - Knob 4 - - Knob 5 Page - Knob 1 Same function as Cursor q (page 83). Knob 3 [ Turn] Function This setting selects whether the A5000/A4000 activates the "first" function or the "last" (most recent) function when you switch to a different mode. [Range] 1stFunction, LastFunction, HoldFunction • 1stFunction ... When you switch to a different mode, the A5000/A4000 automatically moves into the function identified by the first (leftmost) function key. 198 Chapter 8 UTILITY Mode • A5000/A4000 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q