Yamaha A5000 Owner's Manual - Page 129
Pitch, Use this to set the sample's tuning and pitch characteris, tics.
View all Yamaha A5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
EDIT-MAP/OUT Cursor e (Output) Cursor e Turn action Press action Knob 1 Cursor/Page Tree View Knob 2 Output1 - Knob 3 Output Level1 QUICK... Knob 4 Output2 - Knob 5 Output Level2 QUICK... Knob 1 Same function as Cursor q (page 127). Knob 2 [ Turn] Output1 Sets the sample's output destination. Samples have two independent output destinations (Output 1 and 2); this parameter sets the Output 1 destination. [Range] off, StereoOut, AsgnOutL&R, AsgnOut1&2 - AsgnOut5&6, DIG&OPT, Ef1 - Ef6 (Ef1 - Ef3 on the A4000) • StereoOut ... Output is sent to the rear-panel STEREO OUT jacks as well as the front-panel PHONES jack. • AsgnOutL&R ... The rear-panel assignable output jacks. • AsgnOut1&2, AsgnOut3&4, AsgnOut5&6 ... The corresponding assignable outputs on the optional AIEB1 I/O expansion board. • DIG&OPT ... The coaxial and optical digital outputs on the optional AIEB1 I/O expansion board. • Ef1 - Ef6 (Effect1 - 6) (Ef1 - Ef3 on the A4000) ... Output is routed to the specified effect. • The AsgnOut1&2, AsgnOut3&4, AsgnOut5&6, and DIG&OPT output destinations cannot be selected unless the optional AIEB1 I/O expansion board is installed. Knob 3 [ Turn] Output Level1 Specifies the output level of Output1 [Range] 0 - 127 [ Press] QUICK... Calls the quick entry menu (page 83). • When both the sample and Easy Edit Output1 and Output 2 parameters are set to the same output destination, the higher of the two output level settings (Output Level 1 and Output Level2) will take priority. If reducing the Output Level 1 or Output Level 2 setting has no effect, check the sample and Easy Edit Output1 and Output2 destination settings. Knob 4 [ Turn] Output2 Sets the sample's output destination. Samples have two independent output destinations (Output 1 and 2); this parameter sets the Output 2 destination. [Range] off, StereoOut, AsgnOutL&R, AsgnOut1&2 - AsgnOut5&6, DIG&OPT, Ef1 - Ef6 (Ef1 - Ef3 on the A4000) The settings are the same as for the Output1 parameter, above Knob 5 [ Turn] Output Level2 Specifies the output level of Output2 [Range] 0 - 127 [ Press] QUICK... Calls the quick entry menu (page 83). • When both the sample and Easy Edit Output1 and Output 2 parameters are set to the same output destination, the higher of the two output level settings (Output Level 1 and Output Level2) will take priority. If reducing the Output Level 1 or Output Level 2 setting has no effect, check the sample and Easy Edit Output1 and Output2 destination settings. Pitch [EDIT] Button → [F2] Button → Knob 1 to select "EDIT-Pitch" Use this page to set the sample's tuning and pitch characteristics. Cursor q (Pitch) Cursor q Turn action Press action Knob 1 Cursor/Page Tree View Knob 2 Pitch Coarse QUICK... Knob 3 Pitch Fine QUICK... Knob 4 Knob 5 Fixed Pitch Random Pitch - QUICK... Knob 1 [ Turn] Cursor/Page Positions the cursor and selects display pages. [ Press] Tree View Calls the Tree View display (page 83). 129 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q A5000/A4000 • Chapter 5 EDIT Mode