Yamaha A5000 Owner's Manual - Page 212

About the COMMANDS Knob 5 [ Press] EXEC&CONT Press this knob to call the arrange confirmation display. Press Knob 5 (YES) to actually execute the arrange operation. Cursor w Cursor w Turn action Press action Knob 1 Cursor EXEC Knob 2 Target Channel MIDI Knob 3 Target Area MIDI Knob 4 Map From Knob 5 Map Key MIDI EXEC&CONT Knob 1 Same function as Cursor q (page 211). Knob 2 [ Turn] Target Channel Specifies the MIDI channel which will be used to select the samples to be arranged. [Range] A01 - B16 (01 - 16 on the A4000), Bch, all • A01 - B16 (01 - 16 on the A4000) ... Only samples set to the corresponding receive channel will be arranged. • Bch ... Only samples set to the basic receive channel (page 94) will be arranged. • all ... All assigned samples will be arranged. [ Press] MIDI Allows setting the Target Channel parameter directly from an external MIDI controller (page 82). • When setting the MIDI channel via MIDI on the A5000, receive the appropriate MIDI messages via the MIDI IN-A connector to set channels A01 - A16, and via the MIDI IN-B connector to set channels B01 - B16. Knob 3 [ Turn] Target Area Specifies the lowest note in the key area containing samples to be arranged. [Range] C-2 - G8 • When the Arrange Type parameter is set to Program, all samples in the range from the specified Target Area note up to G8 will be selected for arrangement. • When the Arrange type parameter is set to SampleBank, samples which are both in the SAMPLE parameter Key Range (page 127) and in the range from the Target Area not to G8 will be selected. [ Press] MIDI Allows setting the Target Area parameter directly from an external MIDI controller (page 82). Knob 4 [ Turn] Map From Sets the base note for sample arrangement. The samples selected for arrangement will be mapped from the specified Map From note upward, key by key. [Range] C-2 - G8 [ Press] MIDI Allows setting the Map From parameter directly from an external MIDI controller (page 82). Knob 5 [ Turn] Map Key Determines whether samples will or will not be assigned to black keys. [Range] White, all • White ... Samples will be assigned only to white keys. • all ... samples will be assigned to all keys (white and black). [ Press] EXEC&CONT Press this knob to call the arrange confirmation display. Press Knob 5 (YES) to actually execute the arrange operation. FREEZE [COMMAND/EXIT] Button → Knob 1 to highlight display line 2 → Press Knob 2. This command actually applies the current Easy Edit or Sample Bank settings directly to the samples. After execution the Easy Edit or Sample Bank settings are initialized. • If a sample which uses Easy Edit settings or sample bank settings is copied to a different program or sample bank, the sound of the sample will change. The Freeze function can be used to actually apply the Easy Edit or sample bank settings to a sample so that it can be moved to any other program or sample bank with no change in sound. It is also possible to simultaneously change the loop modes of all samples contained in a sample bank. [Operation] 1. Select the Freeze Type (page 213). 2. Make other settings as required. 3. Press Knob 1 (EXEC) or Knob 5 (EXEC&CONT), and the freeze confirmation display will appear. Press Knob 5 (YES) to execute the freeze operation. • If Knob 1 (EXEC) is used to execute the command, the display previous to the command menu will be recalled after execution has finished. If Knob 5 (EXEC&CONT) is used to execute the command, the freeze display will be retained so you can continue and perform further freeze operations. 212 Chapter 9 COMMAND • A5000/A4000 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q