Yamaha A5000 Owner's Manual - Page 193

UTILITY-PANEL PLAY Knob 3 [ Turn] MIDI Out Specifies the MIDI connector via which the function button note-on data will be transmitted. [Range] A→MIDIOUT, B→MIDIOUT • A→MIDIOUT ... The note-on data from function buttons set to MIDI channels A01 - A16 will be transmitted via MIDI OUT. The note-on data from function buttons set to MIDI channels B01 - B16 will affect playback of the A5000 only. • B→MIDIOUT ... The note-on data from function buttons set to MIDI channels B01 - B16 will be transmitted via MIDI OUT. The note-on data from function buttons set to MIDI channels A01 - A16 will affect playback of the A5000 only. • The A4000 does not have this parameter. Cursor w Cursor w Turn action Press action Knob 1 Cursor/Page Tree View Knob 2 Funktion Key# - Knob 3 Note MIDI Knob 4 Velocity MIDI Knob 5 MIDI Channel MIDI Knob 1 Same function as Cursor q (page 192). Knob 2 [ Turn] Function Key# (Function Key Number) Selects the function button (1 - 6) to be set up for noteon transmission. Values "1" through "6" correspond to function buttons [F1] through [F6]. [Range] 1 - 6 • After selecting the function button to be set up for note-number transmission, use Knobs 3 - 5 to set the note number, MIDI channel, and velocity, as required. Knob 3 [ Turn] Note Use this knob to set the note to be played by the selected function key. The setting determines the note value that the key transmits when sending a Note-On message. [Range] C-2 - G8 • If the Note Display Type utility (UTILITY-SYSTEMCustom: page 198) is set to "name" the parameter will be displayed as note names such as "C3." If set to "number" the parameter will be displayed as MIDI note numbers such as "60." [ Press] MIDI When this knob is pressed the parameter can be directly set by a MIDI note-on message received from an external MIDI device. See page 82. Knob 4 [ Turn] Velocity Use this knob to set the velocity for selected function key. The setting determines the velocity value that the key transmits when sending a Note-On message. [Range] 1 - 127 [ Press] MIDI When this knob is pressed the parameter can be directly set by a MIDI note-on message received from an external MIDI device. See page 82. Knob 5 [ Turn] MIDI Channel Use this knob to set the "Transmit" channel for the selected function key. The setting determines the MIDI channel over which the Note-On message is transmitted. Set the value to Bch if you want to use the channel selected by the BasicCh parameter (page 89). [Range] A01 - B16 (01 - 16 on the A4000), Bch [ Press] MIDI When this knob is pressed the parameter can be directly set by a MIDI note-on message received from an external MIDI device. See page 82. • When setting the MIDI channel via MIDI on the A5000, receive the appropriate MIDI messages via the MIDI IN-A connector to set channels A01 - A16, and via the MIDI IN-B connector to set channels B01 - B16. 193 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q A5000/A4000 • Chapter 8 UTILITY Mode