Yamaha A5000 Owner's Manual - Page 107

PLAY-SETUP 5. SETUP This mode includes functions such as LFP S/H (Sample & Hold) speed and A/D input setup. Press the [PLAY] button and then the [F5] button to enter the SETUP mode. 2 display pages are provided: S/Hspeed and ADInput. • See "Basic Operation" on page 78 for details on acessing the various display pages. • When the program mode is set to "Multi" (page 89), the master program setup settings take priority (the master program is the program selected for the part assigned to the basic channel). If a setup function is accessed when any other part is selected "Not a Master Part" will appear on the display. If this happens select an appropriate part via the PLAY-PROGRAM-PgmSel page (page 89), and then use the setup functions. AD Input [PLAY] Button → [F5] Button → Knob 1 to select "PLAY-ADInput" The ADInput page includes AD input ON/Off, source, pan, and other functions relating to operation of the A/D input. • Depending on the AD Input Source setting the L and R A/D inputs can be used as independent mono inputs. Cursor q Cursor q S/H Speed [PLAY] Button → [F5] Button → Knob 1 to select "PLAY-S/Hspeed" Set the sample & hold speed for the LFO (low-frequency oscillator). Turn action Press action Knob 1 Page Tree View Knob 2 - - Knob 3 S/HSpeed QUICK... Knob 4 - - Knob 5 - - Knob 1 [ Turn] Page Selects display pages. [ Press] Tree View Calls the Tree View display (page 83). Knob 3 [ Turn] S/HSpeed (Sample & Hold Speed) Turn the knob to set the sample & hold speed for the LFO (low-frequency oscillator). This setting determines how the LFO operates on samples whose LFO Wave parameter is set to S/H. Specifically, the setting determines the "sample and hold" rate used for random LFO modulation (page 143). • Note that the term "sample" in "sample & hold" refers to sampling rate, and is unrelated to A5000/A4000 sound samples. [ Press] QUICK... Calls the quick entry menu (page 83). Turn action Press action Knob 1 Cursor/Page Tree View Knob 2 AD Input on/off - Knob 3 AD Input Source - Knob 4 AD Input-L Pan QUICK... Knob 5 AD Input-R Pan QUICK... Knob 1 [ Turn] Cursor/Page Positions the cursor and selects display pages. [ Press] Tree View Calls the Tree View display (page 83). Knob 2 [ Turn] AD Input on/off Switch the A/D-input feature on or off. [Range] off, on Knob 3 [ Turn] AD Input Source Selects the input for the acoustic signal. [Range] L/R, L+R, 2Mono • L/R ... Use input stereo signal; handle the signal as stereo. • L+R ... Use input stereo signal, but handle as monaural (mix the incoming L-channel and Rchannel signals). • 2Mono ... The received stereo input signal is processed as two independent mono signals. Knob 4 [ Turn] AD Input-L Pan (A/D Input Left Pan) Specifies the output pan position of the signal received via the "L" A/D input jack. [Range] -63 - +63 Positive values set pan to the right; negative values set pan to the left. [ Press] QUICK... Calls the quick entry menu (page 83). 107 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q A5000/A4000 • Chapter 4 PLAY Mode