Yamaha A5000 Owner's Manual - Page 140
Pitch EG, Use this to set up the sample's PEG pitch envelope gen
View all Yamaha A5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
EDIT-EG Knob 2 [ Turn] FEG Rate Scaling This setting determines how the FEG rates (FEG attack, FEG decay, and FEG release rates) vary according to keyboard location (pitch) of the played note. Set the value to 0 to keep rates the same for all keyboard notes. Positive settings cause rates to increase as you move up the keyboard, while negative settings cause rates to decrease as you move up the keyboard. [Range] -7 - +7 [ Press] QUICK... Calls the quick entry menu (page 83). Knob 3 [ Turn] FEG Rate Velocity Sensitivity This value sets the velocity sensitivity of the FEG rates: the amount by which the FEG rates (FEG attack, FEG decay, and FEG release rates) vary in response to the velocity (force) of the played note. Set the value to 0 to keep rates the same for all velocities. Positive settings cause rates to increase as velocity increases, while negative settings cause rates to decrease as velocity increases. [Range] -63 - +63 [ Press] QUICK... Calls the quick entry menu (page 83). Knob 4 [ Turn] FEG Attack Level Velocity Sensitivity This parameter sets the first velocity-sensitivity value for the FEG's initial level and attack level. The value operates together with the value set by Knob 5 to determine the amount by which these levels vary in response to the velocity of the played note. Positive settings cause levels to increase as velocity increases, while negative settings cause levels to decrease as velocity increases. [Range] -63 - +63 [ Press] QUICK... Calls the quick entry menu (page 83). Knob 5 [ Turn] FEG Level Velocity Sensitivity This parameter sets the general velocity sensitivity for all FEG levels (FEG initial, FEG attack, FEG sustain, and FEG release). Positive settings cause levels to increase as velocity increases, while negative settings cause levels to decrease as velocity increases. [Range] -63 - +63 [ Press] QUICK... Calls the quick entry menu (page 83). Pitch EG [EDIT] Button → [F4] Button → Knob 1 to select "EDIT-PitchEG" Use this page to set up the sample's PEG (pitch envelope generator). The PEG determines how the pitch varies over time as each note plays out. Pitch (high) Initial Level Basic Pitch Sustain Level Attack Level Release Level Time Pitch (low) Attack Rate Decay Rate Note On Release Rate Note Off Cursor q (Pitch EG Rate) Cursor q Turn action Press action Knob 1 Cursor/Page Tree View Knob 2 - - Knob 3 PEG Attack Rate QUICK... Knob 4 Knob 5 PEG Decay PEG Release Rate Rate QUICK... QUICK... Knob 1 [ Turn] Cursor Position/Page Selection Positions the cursor and selects display pages. [ Press] Tree View Calls the Tree View display (page 83). Knob 3 [ Turn] PEG Attack Rate This value sets the rate at which the pitch moves from its initial level (at Note On) to the attack level. Higher values produce faster rates. [Range] 0 - 127 [ Press] QUICK... Calls the quick entry menu (page 83). 140 Chapter 5 EDIT Mode • A5000/A4000 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q