Yamaha A5000 Owner's Manual - Page 105

PLAY-EFFECT Knob 5 [ Turn] Effect Edit Type Specifies the the selection method to be used for selecting effect parameters. [Range] full, favorite • full ... This setting allows you to select and set any parameter from the full range of parameters available for the selected effect. Although you have access to all parameters, it can take a little more time to locate the desired parameters using this method. • favorite ... You have immediate access to four of your "favorite" parameters. [DISPLAY] q The PLAY-EFFECT-EfSetupA/B (EfrSetup on the A4000) page shows the specified Effect Output (page 102) and Effect Connect type (page 103). s Effect Edit Type = full Cursor w Cursor w [Range] 01/Effect Parameters 1 - 16/Effect Parameter 16, --/Input Level, --/Output Level, --/Pan, --/Width • 01/Effect Parameters 1 - 16/Effect Parameter 16 ... Depends on the selected effect type. • --/Input Level ... Sets the level of the signal sent to the input of the effect. • --/Output Level ... Sets the effect output level. • --/Pan ... Turn the knob to set the pan (stereo positioning) for the effect block's output. Positive values set pan to the right; negative values set pan to the left. If the effect output is stereo, higher absolute pan settings will narrow the stereo feeling while noticeably shifting the sound position. • --/Width ... Sets the stereo width of the effect. Negative values reverse the stereo image. • When a selected effect type has less than 16 parameters, unavailable parameters will appear as "No./-----" on the display. • If the selected Effect Type is "Through," effect paramerts 1 - 16 will appear as "------" on the display. Knob 5 [ Turn] Value Turn the knob to set the value for the parameter selected by Knob 4. Turn action Press action Knob 1 Cursor/Page Tree View Knob 2 Effect # - Knob 3 - - Knob 4 Parameter # - Knob 5 Value - s Effect Edit Type = favorite Cursor w Knob 1 Same function as cursor q (page 104). Knob 2 [ Turn] Effect # (Effect Number) Selects the effect to be edited. [Range] Ef1 - Ef6 (Ef1 - Ef3 on the A4000) • The effect type assigned to the selected effect will be shown on the display (page 102). Knob 4 [ Turn] Parameter # (Parameter Number) Turn either knob to select the parameter whose value you want to view or set. You can then set the value using Knob 5. You can repeat the sequence to set each of the available parameters: first select the parameter with Knob 4, and then set the value with Knob 5. Note that the available parameters differ for each effect type. For a listing of parameters and their meanings, refer to the "Effect parameter list" in the Appendix. (page 256). Cursor w Turn action Press action Knob 1 Cursor/Page Tree View Knob 2 Effect # - Knob 3 - - Knob 4 - - Knob 5 - - Knob 1 [ Turn] Cursor/Page Positions the cursor and selects display pages. [ Press] Tree View Calls the Tree View display (page 83). Knob 2 [ Turn] Effect # (Effect Number) Selects the effect to be edited. [Range] Ef1 - Ef6 (Ef1 - Ef3 on the A4000) • The effect type assigned to the selected effect will be shown on the display (page 102). 105 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q A5000/A4000 • Chapter 4 PLAY Mode