Yamaha A5000 Owner's Manual - Page 173

DISK-DISK 5. DISK DISK allows disks to be selected, renamed, and mounted or unmounted. The A5000/A4000's own SCSI ID number can also be set via this display page. • To format or partition a disk, press the [COMMAND/EXIT] button to access the disk commands (page 177). • See "7. DISK COMMANDS" on page 177 for more information on disks, partitions, and volumes. Press the [DISK] button and then the [F5] button to go to the DISK display. 2 display pages are provided: Disk, and Setup. Disk Select [DISK] Button → [F5] Button → Knob 1 to select "DISK-Disk" With these functions you can select a disk to be loaded from or saved to, or change the name of the selected disk. The amount of available space on the currently selected disk is shown in the upper right corner of the display. Knob 3 [ Turn] Mount Mounts (internally connects) or unmounts (internally disconnects) the selected device. All mounted disks in mounted drives will be displayed on the right side of the display. When "off" (unmounted), that device cannot be used by the A5000/A4000 even if it is properly connected and powered up. [Range] off, on • Mount/Unmount cannot be selected when the A5000/A4000 is selected. Knob 4 [ Turn] Disk Selects a disk. When a floppy disk is selected "FD" will appear to the right of the disk name, and when a hard disk, CD-ROM drive or similar device is selected its SCSI ID or IDE type ("M" or "S") will appear to the right of the disk name. [Range] All disks on all mounted drives. [ Press] RENAME... Calls the display which allows entering a new name for the selected volume. see page 81 for details on character entry. Turn action Press action Knob 1 Page Tree View Knob 2 Drive ID - Knob 3 Mount - Knob 4 Disk RENAME... Knob 5 - - Knob 1 [ Turn] Page Selects display pages. [ Press] Tree View Calls the Tree View display (page 83). Knob 2 [ Turn] Drive ID Selects the drive to be mounted or unmounted via Knob 3. On the display the drive's manufacturer and product number will appear to the right of the drive ID (SCSI ID 0 - 7, IDE M, IDE S will appear to the right of unused drives. The sampler's own ID is displayed as "YAMAHA: A5000/A4000." [Range] SCSI 0 - SCSI 7 (SCSI ID 0 - 7), IDE M (IDE Master), IDE S (IDE Slave). Disk Setup [DISK] Button → [F5] Button → Knob 1 to select "DISK-Setup" Allows setting the sampler's own SCSI ID number, the Play&Load on/off status, etc. Turn action Press action Knob 1 Page Tree View Knob 2 Self ID - Knob 3 Knob 4 Top Partition Play&Load - - Knob 5 - - Knob 1 [ Turn] Page Selects display pages. [ Press] Tree View Calls the Tree View display (page 83). Knob 2 [ Turn] Self ID Sets the A5000/A4000's own SCS ID number. [Range] SCSI 0 - 7 173 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q A5000/A4000 • Chapter 7 DISK Mode