Yamaha A5000 Owner's Manual - Page 216
BULK DUMP, Knob 5, Operation]
View all Yamaha A5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
About the COMMANDS Knob 5 [ Turn] Source Sample Specifies the source sample for the Register operation. All samples in memory can be selected. • If the Regist Source parameter is set to FactorySet, the Source Sample setting will not be used when the command is executed. [ Press] EXEC&CONT Press this knob to call the register confirmation display. Press Knob 5 (YES) to actually execute the register operation. BULK DUMP [COMMAND/EXIT] Button → Knob 1 to highlight display line 2 → Press Knob 4. The Bulk Dump command allows program and sample data in memory to be transferred to other MIDI devices as MIDI bulk data. • The device numbers of the transmitting and receiving devices must be properly matched for bulk data transfers. [Operation] 1. Select the Bulk Type (page 216). 2. Make other settings as required. 3. Press Knob 1 (EXEC) or Knob 5 (EXEC&CONT), and the bulk dump confirmation display will appear. Press Knob 5 (YES) to execute the bulk dump operation. • If Knob 1 (EXEC) is used to execute the command, the display previous to the command menu will be recalled after execution has finished. If Knob 5 (EXEC&CONT) is used to execute the command, the bulk dump display will be retained so you can continue and perform further bulk dump operations. Turn action Press action Knob 1 - EXEC Knob 2 Bulk Type - Knob 3 With Related / Format - Knob 4 Program - Knob 5 Sample EXEC&CONT Knob 1 [ Press] EXEC Press this knob to call the bulk dump confirmation display. Press Knob 5 (YES) to actually execute the bulk dump operation. Knob 2 [ Turn] Bulk Type Specifies the type of data to be transferred via the Bulk Dump operation. [Range] Program, Sample, System, All • Program ... The single program specified via Knob 4 will be transmitted. • Sample ... The single sample or sample bank specified via Knob 5 will be transmitted. • System ... The system data will be transmitted. Knob 3 • All ... All data, including the system data, will be transmitted. [ Turn] With Related / Format When "With Related," all samples assigned to the selected program, or all samples within the selected sample bank, can be automatically transmitted at the same time as the specified program/sample bank. [Range] off, on • off ... Sample data is not transmitted. • on ... Sample data is also transmitted. • The "With Related" setting is possible when the Bulk Type is set to Program or Sample and a sample bank has been selected via Knob 5. Format determines the type of data to be transmitted. [Range] normal, parameter, SDS#1 - SDS#1025 • normal ... Transmit all data (wave and parameter) in A5000/A4000 format. • parameter ... Transmit parameter data only, in A5000/A4000 format. • SDS#1 - SDS#1025 ... Transmit all data (wave and parameter data) in "sample-dump standard format." The numerical value gives the SDS sample number transmitted along with the dumped data. • The "Format" setting is possible when the Bulk Type is set to Sample and a sample has been selected via Knob 5. Knob 4 [ Turn] Program Specifies the program to be transmitted via the Bulk Dump operation. [Range] 001 - 128 • This parameter can only be used when the Bulk Type is set to Program. 216 Chapter 9 COMMAND • A5000/A4000 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q