Yamaha A5000 Owner's Manual - Page 152

RECORDING-RECORD s When the GO Knob (Knob 5) Is Pressed From the Record Ready Display When the "New+" Record Type is selected. If the "New+" Record Type has been selected via the SETUP display (page 153), the following display will appear while recording is in progress. Turn action Press action Knob 1 - - Knob 2 - - Knob 3 - PAUSE Knob 4 - START Knob 5 - FINISH In this state recording will begin the instant Knob 4 (START) is pressed. If "Edge/Manual" triggering has been selected via the TRIGGER page (page 158), recording will start automatically as soon as the input signal exceeds the set start edge trigger level. • If you have set up to record from an audio CD loaded into a CDROM drive connected to the A5000/A4000 via the EXT CTRL display (page 161), playback of the audio CD will start automatically as soon as Knob 4 (START) is pressed. • The Knob 3 (PAUSE) function will only be available if the "New+," Record Type has been selected. The following display will appear while recording is in progress. When the "New" or "Replc" Record Type is selected. If the "Replc" or "New" Record Type has been selected via the SETUP display (page 153), the following display will appear while recording is in progress. Turn action Press action Knob 1 - - Knob 2 - STOP Knob 3 - SKIP Knob 4 - - Knob 5 - FINISH In this state recording will stop and the sampler will return to the record standby display ready to record the next sample when Knob 2 (STOP) is pressed. If "Edge/Manual" stop triggering has been selected via the TRIGGER page (page 159), recording will stop automatically as soon as the input signal level drops below the set stop edge trigger level, and the sampler will return to the record standby display ready to record the next sample. If Knob 3 (>SKIP) is pressed during recording, recording of the current sample will be cancelled and the sampler will return to the record standby display ready to record the next sample. Recording will stop completely and the sampler will return to the record ready mode when Knob 5 (FINISH) is pressed. If "Edge/Manual" start triggering has been selected via the TRIGGER page (page 158), recording will stop when either Knob 2 (>STOP) or Knob 3 (>SKIP), and the following display will appear while the sampler waits for the input signal to drop below the specified stop trigger level before recording of the next sample can begin. Turn action Press action Knob 1 - - Knob 2 - - Knob 3 - ABORT Knob 4 - - Knob 5 - FINISH In this state recording will stop and the sampler will return to the record ready display when Knob 5 (FINISH) is pressed. If "Edge/Manual" triggering has been selected via the TRIGGER page (page 159), recording will stop automatically as soon as the input signal level drops below the set stop edge trigger level, and the sampler will return to the record ready display. If you press Knob 3 (ABORT) during recording, recording will be cancelled and the sampler will return to the record ready display. • If you have set up to record from an audio CD loaded into a CDROM drive connected to the A5000/A4000 via the EXT CTRL display (page 161), playback of the audio CD will stop automatically as soon as Knob 5 (FINISH) or Knob 3 (ABORT) is pressed. Turn action Press action Knob 1 - - Knob 2 - STOP Knob 3 - SKIP Knob 4 - START Knob 5 - FINISH When the input signal level has dropped below the stop edge trigger level, the sampler will automaticaly return to the record standby display, ready to record the next sample. While the sampler is waiting for the input signal to decay below the stop trigger level it is possible to immediately force recording of the next sample to start by pressing Knob 4 (>START). • Knob 4 (>PAUSE) can be pressed to temporarily pause recording (recording will not re-start even if the input signal level exceeds the specified start trigger level). Press Knob 4 (>CONTINUE) a second time to resume recording. • When recording from an audio CD loaded in a CD-ROM drive connected to the A5000/A4000, the next index on the CD is automatically selected when Knob 2 (>STOP) or Knob 3 (>SKIP) is pressed. If there is no index, or recording was stopped during playback of the last index on the track, the next track will be selected for playback. CD playback will stop when Knob 5 (>FINISH) is pressed. 152 Chapter 6 RECORD Mode • A5000/A4000 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q