Yamaha A5000 Owner's Manual - Page 28
Sound Check
View all Yamaha A5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Sound Check Sound Check The next procedure takes you though a simple sound check that you can use to confirm proper connection of external audio and MIDI devices. The procedure assumes that you are using a MIDI keyboard to control A5000/A4000 playback. [Procedure] 1. Make sure that the A5000/A4000 STEREO OUT jacks are connected to an amplifier or mixer and that all components are ready for playback. (page 20) 2. Connect the MIDI OUT connector of your MIDI controller - keyboard, sequencer, etc. - to the MIDI IN-A connector (MIDI IN on the A4000) of the sampler and ensure that all components are ready for MIDI control. (page 25) 3. Turn on the A5000/A40000 and all connected equipment. (page 27) 4. Set the A5000/A4000 MASTER VOL control to about the center of its range. 5. Set the amplifier, mixer, or other audio reproduction device's volume to an appropriate level. 6. Set the external MIDI controller's MIDI transmit channel to 1. 7. Make sure the sampler's [PLAY] mode button is lit (press the [PLAY] button if it isn't). 8. Press the [F2] function button. 28 Chapter 1 Setting Up • A5000/A4000 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q