Yamaha A5000 Owner's Manual - Page 206

About the COMMANDS Selecting a Command [COMMAND/EXIT] Button → COMMAND Menu Select the desired command from the COMMAND menu. [Operation] Select a COMMAND as follows: 1. Turn Knob 1 to highlight the display line containing the desired command. 2. Press the knob - Knob 2 - Knob 5 - corresponding to the desired command. Turn action Press action Knob 1 Cursor EXIT Knob 2 - Command Select Knob 3 - Command Select Knob 4 - Command Select Knob 5 - Command Select Knob 1 [ Turn] Cursor Positions the cursor. [ Press] EXIT Returns to the display that was showing before the command menu was called. Knob 2 - 5 [ Press] Command Select Selects the corresponding command in the highlighted display line, and selects display pages. COPY [COMMAND/EXIT] Button → Knob 1 to highlight display line 1 → Press Knob 2 Copies all or specified programs or samples (sample banks) in memory to different programs or samples (sample banks). [Operation] Copy the data as follows: 1. Select the type of data to be copied via the Copy Type parameter. 2. If the selected Copy Type is ProgramParameters, ProgramMerge, or StepWave, also specify the copy source and destination programs. If the selected Copy Type is Effect, also specify the copy source and destination programs, and the effect number. If the selected Copy Type is SampleParameters, also specify the copy source and destination samples or sample banks. • Copy cannot be executed if the specified copy source and destination are the same. 3. Press Knob 1 (EXEC) or Knob 5 (EXEC&CONT), and the copy confirmation display will appear. Press Knob 5 (YES) to execute the copy operation. • If Knob 1 (EXEC) is used to execute the command, the display previous to the command menu will be recalled after execution has finished. If Knob 5 (EXEC&CONT) is used to execute the command, the copy display will be retained so you can continue and perform further copy operations. Cursor q Cursor q Command Execution The command execution procedure is the same for all commands. In all command pages Knob 1 is "EXEC" (EXECUTE) and Knob 5 is "EXEC&CONT" (EXECUTE & CONTINUE). The currently selected command is executed when either Knob 1 (EXEC) or Knob 5 (EXEC&CONT) is pressed. When Knob 1 (EXEC) is used to execute a command, the display that was showing immediately before executing the command is automatically recalled after execution has finished. When Knob 5 (EXEC&CONT) is used to execute a command, the same display is retained after command execution so that you can immediately repeat execution of the same command. Press the [COMMAND/EXIT] button to return to the command menu without executing the command. Turn action Press action Knob 1 Cursor EXEC Knob 2 - - Knob 3 Copy Type - Knob 4 - - Knob 5 - EXEC&CONT Knob 1 [ Turn] Cursor Positions the cursor. [ Press] EXEC Press this knob to call the copy confirmation display. Press Knob 5 (YES) to actually execute the copy operation. Knob 3 [ Turn] Copy Type Selects the type of data to be copied. [Range] ProgramParameters, ProgramMerge, Effect, StepWave, SampleParameters 206 Chapter 9 COMMAND • A5000/A4000 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q