Yamaha A5000 Owner's Manual - Page 38
Select a Record Type, Select an Input, and R inputs, select AD L/R.
View all Yamaha A5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
ESSENTIAL PROCEDURES 3. Select a Record Type With the topmost function line on the display highlighted (use Knob 1 to select the top line if it is not already selected), use Knob 2 to select the "New" Record Type. This is the Record Type to select when you want to record a new sample to the sampler's memory. • In addition to "New," you can select "New+" to append the recorded data to the end of the currently selected sample, "Replc" to replace a specified existing sample, or "Save" to automatically save the recorded data to disk. See page 153 for details. 4. Select an Input Use Knob 1 to highlight the third function line on the display, then use Knob 2 to select the input to which your source is selected. If you have connected a mono microphone to the "L" input, for example, use Knob 2 to select "AD L". If you have a stereo microphone or line source connected to the "L" and "R" inputs, select "AD L/R". • If you have installed the optional AIEB1 I/O Expansion Board (page 13, 14), you will also be able to select "DIGITAL" (the coaxial SPDIF digital input on the expansion board, or "OPTICAL" (the optical digital input on the expansion board). • The A5000/A4000 also allows you to select "StOut" in order to directly re-sample the output signal from the sampler's stereo outputs. 38 Chapter 2 Sampler Basics & Essential Procedures • A5000/A4000 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q