Brother International DCP1000 Service Manual - Page 119
Brother International DCP1000 - DCP 1000 B/W Laser Manual
UPC - 012502565796
View all Brother International DCP1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Error Code X X (Hex.) Error factor ( AE The CCD HP sensor sticks to OFF, indicating that the CCD unit has not returned to the home position. ) ( AF The CCD HP sensor sticks to ON, indicating that the CCD unit has stayed in the home position. ) ( B1 Dark level offset data error. ) ( B2 Gain control data error. ) • ( B3 Scan area left edge detection error. ) ( B4 Scan area right edge detection error. ) ( B7 AID converter reference voltage error (at High level). ) ( B8 AID converter reference voltage error (at Low level). ) ( BA Magnification error for substantial white level data. ) ( BB Substantial white level data error in black & white mode. ) ( BC Substantial white level data error in photo mode. ) ( BD Black level data error. ) ( BE Detection error of black mark. ) ( BF Detection error of ADF scanning position. ) ( D5 The MODEM fails to complete the command transmission sequence. ) ( E4 E6 ( E8 ( EA ( F5 ( F6 Out of recording paper. ) Write error in EEPROM. Data scanning error during transmission. ) Document removed in phase B.) EOL not found in page memory transmission mode. ) PC interface error. ) Error codes in parentheses do not appear in the "MACHINE ERROR X X", since those errors are displayed as messages described in "[ 1 ] Error messages on the LCD." In the maintenance mode (Function code 82), those error codes may be displayed. 6-5