Brother International DCP1000 Service Manual - Page 176
message should
UPC - 012502565796
View all Brother International DCP1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
WSW31 (Function setting 9) Selector No. 1 Not used. Function 2 Default reduction rate for failure of automatic reduction during recording 3 4 Not used. 5 Minimum short-OFF duration in distinctive ringing 6 7 Not used. 8 "CHANGE DRUM SOON" message Setting and Specifications 0: 100% 1: Reduction rate specified according to the current paper size 0: 130 ms 1: 90 ms 0: Yes 1: No • Selector 2: Default reduction rate for failure of automatic reduction during recording This selector sets the default reduction rate to be applied if the automatic reduction function fails to record one-page data sent from the calling station in a single page of the current recording paper. If it is set to "0," the equipment records one-page data at full size (100%) without reduction; if it is set to "1," the equipment records it at the size specified according to the current paper size. • Selector 5: Minimum short-OFF duration in distinctive ringing The ringer pattern consists of short and long rings, e.g., short-short-long rings. This selector sets the minimum OFF duration following a short ring in order to avoid missing ringer tones in distinctive ringing. If this selector is set to "1," when the short-OFF duration is a minimum of 90 ms long, then the equipment will interpret the short-OFF as OFF. • Selector 8: "CHANGE DRUM SOON" message This selector determines whether or not the "CHANGE DRUM SOON" message should appear on the LCD when the service life of the laser-sensitive drum in the laser unit will expire soon. 33