Brother International DCP1000 Service Manual - Page 138
Brother International DCP1000 - DCP 1000 B/W Laser Manual
UPC - 012502565796
View all Brother International DCP1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Trouble (12) Faulty image registration (Leading edge of image starts too late on paper) Action to be taken At the printer side • Instruct the user not to load paper exceeding the limit in the A SF. • Instruct the user to use the recommended types of paper. • Replace the ASF. • Check the position of the registration sensor. • Replace the gear drive unit. (13) Image distortion or improper image alignment LP (14) Blurred at either side In communications Check the following components: - Error code displayed. (Refer to Section 6.1, "ERROR _ INDICATION" in this chapter.) NCU PCB - Main PCB At the scanner Check the following components: - Document take-in roller, separation roller, and their related sections - Document feed roller and its related gears - ADF motor and its harness - Main PCB At the printer side • Check that the laser unit is secured with the screws without looseness. • Check the connection of the polygon motor harness. • Check the connection of the laser flat cable on the main PCB. • Replace the laser unit. At the printer side • Check that the equipment is placed on a flat surface. • Shake the toner cartridge horizontally. If the problem persists, replace it. • Clean the laser beam window (glass) on the laser unit. • Replace the laser unit. 6-24