Brother International DCP1000 Service Manual - Page 38
surrounding
UPC - 012502565796
View all Brother International DCP1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
(4) Remove the screw and take the ADF thickness adjuster out of the upper ADF chute. NOTE: The ADF thickness adjuster is lubricated with grease, so take care not to smear surrounding parts with the grease when handing the ADF thickness adjuster. (5) At either end of the pressure roller shaft, press the latch to the right and take out the pressure rollers and their shaft. Then remove their springs. Taptite, pan B M3x6 Upper ADF chute (Rear) Pressure rollers Pressure roller shaft ADF thickness adjuster Lubricated with grease cz) Pressure roller springs Latches ADF thickness adjuster Correct position of the boss Guide Wrong position: Boss placed on the guide When setting the ADF thickness adjuster, do not put the boss provided on the underside of the adjuster on the guide. 4-10