Brother International DCP1000 Service Manual - Page 83
reinstalling
UPC - 012502565796
View all Brother International DCP1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
4.1.23 Scanner Grounding Plate (1 ) Make sure that the heat-fixing unit is removed. (2) Remove the screw from the scanner grounding plate. (If the bottom plate has not been removed, remove screw "y" also (see page 4-46) that secures both the scanner grounding plate and bottom plate.) (3) Slightly lift up the scanner grounding plate. (4) You may peel off the anti-static brush from the scanner grounding plate. NOTE: Once removed, the anti-static brush will become unusable and a new one will have to be put back in. Taptite, cup B M3x8 Anti-static brush Scanner grounding plate I rL 1. I. 1. Main cover ■ Reassembling Notes • Before attaching a new anti-static brush onto the scanner grounding plate, wipe the surface of the attaching place with a cloth dampened with alcohol. • When reinstalling the scanner grounding plate, fit it over the two bosses of the main cover. 4-55