Brother International DCP1000 Service Manual - Page 154
WSW07, setting, Selectors, Frequency, band range, Selector, current, detection, through, level,
UPC - 012502565796
View all Brother International DCP1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Selector No. 1 2 3 4 6 7 8 WSW07 (Dial tone setting 1) Function Frequency band range Line current detection 2nd dial tone detection level (Z = 600 f2) dial tone interrupt detecting t1istme Not used. Setting and Specifications No. 1 2 0 0 : 0 1 : 1X : 0: No No. 4 5 6 0 00 : 0 01 : 0 10 : 0 11 : 100 : 101 : 1 10 : 1 11 : Narrows by 10 Hz Initial value Widens by 10 Hz 1: Yes -21 dBm -24 dBm -27 dBm -30 dBm -33 dBm -36 dBm -39 dBm -42 dBm 0: 30 ms 1: 50 ms NOTE: Selectors 1 through 7 are not applicable in those countries where no dial tone or line current detection is supported, e.g., U.S.A. • Selectors 1 and 2: Frequency band range These selectors set the frequency band for the 1st dial tone and the busy tone (before dialing) to be detected. This setting is effective only when selectors 1 through 3 of WSW05 are set to "1,1,1." • Selector 3: Line current detection This selector determines whether or not the equipment should detect a line current before starting dialing. • Selectors 4 through 6: 2nd dial tone detection level These selectors set the detection level of the 2nd dial tone. • Selector 7: 1st dial tone interrupt detecting time This selector sets the allowable time length of an interrupt which should not be interpreted as an interrupt in the 1st dial tone dialing. 11