Cisco IE-3000-8TC Command Reference - Page 113
dot1x critical global configuration, show dot1x, Cisco IE 3000 Switch Command Reference, OL-13019-01
![]() |
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Chapter 2 IE 3000 Switch Cisco IOS Commands dot1x critical (interface configuration) You can configure the inaccessible authentication bypass feature and the restricted VLAN on an IEEE 802.1x port. If the switch tries to re-authenticate a critical port in a restricted VLAN and all the RADIUS servers are unavailable, the switch changes the port state to the critical authentication state, and it remains in the restricted VLAN. You can configure the inaccessible bypass feature and port security on the same switch port. Examples This example shows how to enable the inaccessible authentication bypass feature on port 2: Switch# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Switch(config)# interface gigabitethernet1/2 Switch(config-if)# dot1x critical Switch(config-if)# end Switch(config)# end Switch# You can verify your configuration by entering the show dot1x [interface interface-id] privileged EXEC command. Related Commands Command dot1x critical (global configuration) show dot1x [interface interface-id] Description Configures the parameters for the inaccessible authentication bypass feature on the switch. Displays IEEE 802.1x status for the specified port. OL-13019-01 Cisco IE 3000 Switch Command Reference 2-87
![](/manual_guide/products/cisco-ie30008tc-command-reference-94363f4/113.png)