Cisco IE-3000-8TC Command Reference - Page 686

debug dot1x Appendix B IE 3000 Switch Debug Commands debug dot1x Use the debug dot1x privileged EXEC command to enable debugging of the IEEE 802.1x authentication feature. Use the no form of this command to disable debugging. debug dot1x {all | errors | events | feature | packets | registry | state-machine} no debug dot1x {all | errors | events | feature | packets | registry | state-machine} Syntax Description all errors events feature packets registry state-machine Display all IEEE 802.1x authentication debug messages. Display IEEE 802.1x error debug messages. Display IEEE 802.1x event debug messages. Display IEEE 802.1x feature debug messages. Display IEEE 802.1x packet debug messages. Display IEEE 802.1x registry invocation debug messages. Display state-machine related-events debug messages. Note Though visible in the command-line help strings, the redundancy keyword is not supported. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines The undebug dot1x command is the same as the no debug dot1x command. Related Commands Command show debugging show dot1x Description Displays information about the types of debugging that are enabled. Displays IEEE 802.1xstatistics, administrative status, and operational status for the switch or for the specified port. Cisco IE 3000 Switch Command Reference B-8 OL-13019-01