Cisco IE-3000-8TC Command Reference - Page 694
debug ip igmp snooping, querier | router
![]() |
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 694 highlights
debug ip igmp snooping Appendix B IE 3000 Switch Debug Commands debug ip igmp snooping Use the debug igmp snooping privileged EXEC command to enable debugging of Internet Group Management Protocol (IGMP) snooping activity. Use the no form of this command to disable debugging. debug ip igmp snooping [group | management | querier | router | timer] no debug ip igmp snooping [group | management | querier | router | timer] Syntax Description group management querier router timer (Optional) Display IGMP snooping group activity debug messages. (Optional) Display IGMP snooping management activity debug messages. (Optional) Display IGMP snooping querier debug messages. (Optional) Display IGMP snooping router activity debug messages. (Optional) Display IGMP snooping timer event debug messages. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines The undebug ip igmp snooping command is the same as the no debug ip igmp snooping command. Related Commands Command debug platform ip igmp snooping show debugging Description Displays information about platform-dependent IGMP snooping activity. Displays information about the types of debugging that are enabled. B-16 Cisco IE 3000 Switch Command Reference OL-13019-01
![](/manual_guide/products/cisco-ie30008tc-command-reference-94363f4/694.png)