Cisco IE-3000-8TC Command Reference - Page 779
show platform spanning-tree, show platform spanning-tree synchronization
![]() |
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 779 highlights
Appendix C IE 3000 Switch Show Platform Commands show platform spanning-tree show platform spanning-tree Use the show platform spanning-tree privileged EXEC command to display platform-dependent spanning-tree information. show platform spanning-tree synchronization [detail | vlan vlan-id] [ | {begin | exclude | include} expression] Syntax Description synchronization [detail | vlan vlan-id] | begin | exclude | include expression Display spanning-tree state synchronization information. The keywords have these meanings: • detail-(Optional) Display detailed spanning-tree information. • vlan vlan-id-(Optional) Display VLAN switch spanning-tree information for the specified VLAN. The range is 1 to 4094. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes Privileged EXEC Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines You should use this command only when you are working directly with your technical support representative while troubleshooting a problem. Do not use this command unless your technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. OL-13019-01 Cisco IE 3000 Switch Command Reference C-25
![](/manual_guide/products/cisco-ie30008tc-command-reference-94363f4/779.png)