Cisco IE-3000-8TC Command Reference - Page 346

show cip Chapter 2 IE 3000 Switch Cisco IOS Commands show cip Use the show cip privileged EXEC command to display information about the Common Industrial Protocol (CIP) subsystem. show cip {connection | file | miscellaneous | object | security | session | status} [| {begin | exclude | include} expression] Syntax Description connection file miscellaneous object security session status | begin | exclude | include expression Display the CIP connection information. Display the information about the CIP file instances. Display miscellaneous CIP system information. Display information about specific CIP objects. These objects include assembly, Ethernet link, identity, switch parameter, time sync, and TCP/IP objects. Display the CIP security window status and settings. Display the active and inactive CIP sessions. Display the CIP status (enabled or disabled). (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes Privileged EXEC Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of output from the show cip security command: Switch# show cip security State : Enabled Password: abc123 Window: Open Owner IP: 172.20.140.147 Window timeout: 600 seconds Window open tick: 17 Related Commands Command cip Description Enables the CIP and sets the CIP security options on the switch. 2-320 Cisco IE 3000 Switch Command Reference OL-13019-01