Cisco IE-3000-8TC Command Reference - Page 690
debug interface
![]() |
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 690 highlights
debug interface Appendix B IE 3000 Switch Debug Commands debug interface Use the debug interface privileged EXEC command to enable debugging of interface-related activities. Use the no form of this command to disable debugging. debug interface {interface-id | null interface-number | port-channel port-channel-number | vlan vlan-id} no debug interface {interface-id | null interface-number | port-channel port-channel-number | vlan vlan-id} Syntax Description interface-id null interface-number port-channel port-channel-number vlan vlan-id Display debug messages for the specified physical port, identified by switch or module number/port, for example gigabitethernet 1/2. Display debug messages for null interfaces. Display debug messages for the specified EtherChannel port-channel interface. The port-channel-number range is 1 to 6. Display debug messages for the specified VLAN. The vlan-id range is 1 to 4094. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines If you do not specify a keyword, all debug messages appear. The undebug interface command is the same as the no debug interface command. Related Commands Command show debugging show etherchannel Description Displays information about the types of debugging that are enabled. Displays EtherChannel information for the channel. B-12 Cisco IE 3000 Switch Command Reference OL-13019-01
![](/manual_guide/products/cisco-ie30008tc-command-reference-94363f4/690.png)