Cisco IE-3000-8TC Command Reference - Page 264

mls qos srr-queue input dscp-map Chapter 2 IE 3000 Switch Cisco IOS Commands You can map each DSCP value to a different queue and threshold combination, allowing the frame to follow different behavior. You can map up to eight DSCP values per command. Examples This example shows how to map DSCP values 0 to 6 to ingress queue 1 and to threshold 1 with a drop threshold of 50 percent. It maps DSCP values 20 to 26 to ingress queue 1 and to threshold 2 with a drop threshold of 70 percent: Switch(config)# mls qos srr-queue input dscp-map queue 1 threshold 1 0 1 2 3 4 5 6 Switch(config)# mls qos srr-queue input dscp-map queue 1 threshold 2 20 21 22 23 24 25 26 Switch(config)# mls qos srr-queue input threshold 1 50 70 You can verify your settings by entering the show mls qos maps privileged EXEC command. Related Commands Command mls qos srr-queue input bandwidth mls qos srr-queue input buffers mls qos srr-queue input cos-map mls qos srr-queue input priority-queue mls qos srr-queue input threshold show mls qos maps Description Assigns shaped round robin (SRR) weights to an ingress queue. Allocates the buffers between the ingress queues. Maps class of service (CoS) values to an ingress queue or maps CoS values to a queue and to threshold ID. Configures the ingress priority queue and guarantees bandwidth. Assigns WTD threshold percentages to an ingress queue. Displays QoS mapping information. 2-238 Cisco IE 3000 Switch Command Reference OL-13019-01