Cisco IE-3000-8TC Command Reference - Page 61
Command Reference, Release 12.2 > File Management
![]() |
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 2 IE 3000 Switch Cisco IOS Commands channel-group For a complete list of configuration guidelines, see the "Configuring EtherChannels" chapter in the software configuration guide for this release. Examples This example shows how to configure an EtherChannel. It assigns two static-access ports in VLAN 10 to channel 5 with the PAgP mode desirable: Switch# configure terminal Switch(config)# interface range gigabitethernet1/1 -2 Switch(config-if-range)# switchport mode access Switch(config-if-range)# switchport access vlan 10 Switch(config-if-range)# channel-group 5 mode desirable Switch(config-if-range)# end This example shows how to configure an EtherChannel. It assigns two static-access ports in VLAN 10 to channel 5 with the LACP mode active: Switch# configure terminal Switch(config)# interface range gigabitethernet1/1 -2 Switch(config-if-range)# switchport mode access Switch(config-if-range)# switchport access vlan 10 Switch(config-if-range)# channel-group 5 mode active Switch(config-if-range)# end You can verify your settings by entering the show running-config privileged EXEC command. Related Commands Command channel-protocol interface port-channel show etherchannel show lacp show pagp show running-config Description Restricts the protocol used on a port to manage channeling. Accesses or creates the port channel. Displays EtherChannel information for a channel. Displays LACP channel-group information. Displays PAgP channel-group information. Displays the current operating configuration. For syntax information, select Cisco IOS Configuration Fundamentals Command Reference, Release 12.2 > File Management Commands > Configuration File Management Commands. OL-13019-01 Cisco IE 3000 Switch Command Reference 2-35
![](/manual_guide/products/cisco-ie30008tc-command-reference-94363f4/61.png)