Cisco IE-3000-8TC Command Reference - Page 521
snmp-server host, snmp-server enable informs
![]() |
View all Cisco IE-3000-8TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 521 highlights
Chapter 2 IE 3000 Switch Cisco IOS Commands snmp-server enable traps vlancreate vlandelete vtp (Optional) Enable SNMP VLAN-created traps. (Optional) Enable SNMP VLAN-deleted traps. (Optional) Enable VLAN Trunking Protocol (VTP) traps. Note Though visible in the command-line help strings, the cpu [threshold], insertion, removal, and rtr keywords are not supported. The snmp-server enable informs global configuration command is not supported. To enable the sending of SNMP inform notifications, use the snmp-server enable traps global configuration command combined with the snmp-server host host-addr informs global configuration command. Defaults The sending of SNMP traps is disabled. Command Modes Global configuration Command History Release 12.2(44)EX Modification This command was introduced. Usage Guidelines Specify the host (NMS) that receives the traps by using the snmp-server host global configuration command. If no trap types are specified, all trap types are sent. When supported, use the snmp-server enable traps command to enable sending of traps or informs. Note Informs are not supported in SNMPv1. To enable more than one type of trap, you must enter a separate snmp-server enable traps command for each trap type. Examples This example shows how to send VTP traps to the NMS: Switch(config)# snmp-server enable traps vtp You can verify your setting by entering the show vtp status or the show running-config privileged EXEC command. Related Commands Command show running-config snmp-server host Description Displays the running configuration on the switch. For syntax information, select Cisco IOS Configuration Fundamentals Command Reference, Release 12.2 > File Management Commands > Configuration File Management Commands. Specifies the host that receives SNMP traps. OL-13019-01 Cisco IE 3000 Switch Command Reference 2-495
![](/manual_guide/products/cisco-ie30008tc-command-reference-94363f4/521.png)